18
Charger Operations
It is highly recommended to have the fl owchart handy while learning
to operate this charger. There are two main ways to setup the charger:
(1) Memory profi le are available for setting and storing charge or
discharge parameters for up to 10 diff erent batteries. Once a battery’s
information is stored into memory, it will be retained until changed
again manually. Recalling a battery’s memory number makes the
charger instantly ready to go!
(2) The other method is by manually setting up the charge or
discharge process each time. The RDX2 Mini is capable of the
following processes:
NiMH
NiCd
RE-PEAK
Pb
Batt
Type
Operation
Program
Description
This charging mode is for charging LiPo/LiHV/LiFe/LiIon battery in normal mode.
This program is for charging or discharging lithium battery which will not be
used for long time.
This mode is for balancing the voltage of lithium-polymer battery cells while
charging.
The charger will charge NiMH and NiCd batteries using the charge current
set by the user.
In re-peak charge mode, the charger can peak charge the battery once,
twice or three times in a row automatically. This is good for confirming the
battery is fully charged, and for checking how well the battery receives fast
charges.
LiPo
LiHV
Lilon
LiFe
CHARGE
STORAGE
BALANCE
CHARGE
COLD CHG
This mode is for charging Pb battery in cold days when the temperature is
5
℃
to -20
℃
.
NORMAL CHG
This mode is for charging Pb battery.
AGM CHG
This mode is for charging AGM battery.
