3
Introduction
Congratulations on your choice of the RDX1 charger from Hitec RCD, USA. The
RDX1 is a high-performance, microprocessor-controlled charger/discharger
with battery management capabilities that are suitable for use with most
popular battery types. The RDX1 also features integrated balancing for six-cell,
Lithium-Polymer (LiPo), Lithium-Ferrite (LiFe) and Lithium-Ion (Li-Ion), as well as
the latest high voltage Lithium-Polymer (LiHV) batteries.
Please read this entire operating manual before using the RDX1 Charger. If
you are unsure of its proper operation after reading the manual, please seek
advice from an experienced hobbyist or someone familiar with proper battery
charging procedures.
THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE
DANGEROUS. FAILURE TO FOLLOW THESE EXPLICIT WARNINGS CAN
RESULT IN PROPERTY DAMAGE AND/OR LOSS OF LIFE.
A
NEVER LEAVE YOUR CHARGER UNATTENDED WHILE IN OPERATION.
A
NEVER CHARGE ON OR AROUND COMBUSTIBLE MATERIALS.
A
NEVER CHARGE A DAMAGED BATTERY PACK.
A
LOW COST, NO-NAME BATTERY PACKS POSE THE MOST DANGER. WE
RECOMMEND YOU ONLY USE BATTERY PACKS THAT ARE SOLD AND
WARRANTED BY A REPUTABLE COMPANY.
A
IT IS HIGHLY RECOMMENDED THAT YOU UTILIZE A SAFETY DEVICE SUCH
AS A STEEL CASE OR LIPO SACK™ WHILE CHARGING LITHIUM CHEMISTRY
BATTERIES.
A
IT IS HIGHLY RECOMMENDED THAT YOU KEEP AN OPERABLE “CLASS A”
FIRE EXTINGUISHER IN THE CHARGING AREA.
FAILURE TO FOLLOW THESE WARNINGS CAN BE CONSIDERED
NEGLIGENCE BY THE OPERATOR AND MAY NEGATE ANY CLAIMS FOR
DAMAGES INCURRED.
Hitec RCD USA will not be held responsible for any damages or injuries that
may occur by persons who fail to follow these warnings or who fail to properly
follow the instructions in this manual.
Warning
