9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
101
Spoiler (GLID)
t5IJTGVODUJPOJTUPCFQSPHSBNNFEPOBTXJUDI*UJTPOPSPò'PSQSPHSFTTJWFQSPQPSUJPOBMEFQMPZNFOUPGBOBJSCSBLFXJUI
a slider control, use the spoiler to Elevator function on page 92.
t*GZPVQSPHSBNUIFBJSCSBLFGVODUJPOPOBTXJUDIJOUIJTNFOVUIF"JSCSBLFUP&MFWBUPSGVODUJPONJYQSPHSFTTJWFBJSCSBLF
deployment feature will not work.
t*GZPVSNPEFMEPFTOPUIBWFBOBJSCSBLFUIJTGVODUJPODBOCFBQQMJFETFQBSBUFMZUPUIFBJMFSPOTFMFWBUPSBOEøBQTUPNPWF
them to a “spoileron”, “crow”/“butterfly” and other creative flight control positions with the selection of a switch.
Note
Spoiler Function and Landing Mode.
The Spoiler function will be used for a switch to deploy a spoiler flight surface.
Switch Option
d. Press
NULL
to apply the Spoiler activation to a two position switch.
Switch
type
Function
2 positions
On or Off
- During the model type set-up in the system menu, select
Spoiler
if your model is to use an airbrake.
This will apply the airbrake to a channel within the model’s program.
a. Select
Spoiler
from the model menu.
b. Press the
ACT
icon to enter the Spoiler menu.
e. The Spoiler can mix with other Functions. Put the value of Speed and Delay by using
+RST -
icon and then proceed to set on the Off position.
f. Select a
Speed
value to have the Spoiler deploy over a selected period of time.
g. Press the
Exit
icon to go back to the model
menu.
