English
9
CAUTION
1.
If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2.
If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3.
If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
WARNING
If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fire. Please observe the
following matters when storing the battery.
䡬
Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.
䡬
Either install the battery in the power tool or
store by securely pressing into the battery cover
until the ventilation holes are concealed to prevent
short-circuits (See Fig. 1).
SPECIFICATIONS
Although this machine includes 20 operation modes, up to four of them can be switched using the mode selection switch.
Four modes that are suitable for commonly performed operations have been set as factory default operation mode. With
an optional communication adaptor, you can freely select your desired operation modes. For details, refer to "Mode
selection and rewriting functions" on page 12.
POWER TOOL
*1: The machine capability of BCL1015 becomes lower than that of BCL1030M in a high-load operation, because both
machines are of the same battery voltage but differ in internal structure.
*2: The Electronic clutch mode is not of the factory default operation mode.
Model
WM10DBL
Battery type
BCL1015
BCL1030M
Electronic pulse mode Wood screw
ø3.8
×
50 mm
Bolt mode
Ordinary bolt
M4 – M8
High-strength bolt
M4 – M6
Self drilling screw mode Small drilling screw
ø5
Capacity *1
Woodwork drilling
ø12
Drill mode
Steel drilling
ø5
Mortar drilling
ø6
Electronic clutch mode *2 Small screw
M6
Electronic pulse mode
19 N·m {194 kgf·cm}
20 N·m {204 kgf·cm}
Tightening torque
Bolt mode
[Tightening is M8 high-strength bolt
(Maximum)
[Tightening time: 3 sec.]
(strength grade 12.9) Hexagon socket used]
[when fully charged
Self drilling screw mode
14 N·m {143 kgf·cm}
at 20
°
C temp]
Drill mode
1.6 N·m {16 kgf·cm}
2.5 N·m {25 kgf·cm}
Electronic clutch mode *2
10-point clutch 1 – 6 N·m {10 – 61 kgf·cm}
Edge shape
Width across flat 6.35, bit insertion shape
Type of motor
DC motor
Electronic pulse mode
0 – 2200 min
-1
No-load speed
Bolt mode
0 – 1300 min
-1
[when fully charged Self drilling screw mode
0 – 2200 min
-1
at 20
°
C temp]
Drill mode
0 – 2200 min
-1
Electronic clutch mode *2
0 – 1140 min
-1
Number of blows
Electronic pulse mode
0 – 1090 min
-1
[when fully charged Bolt mode
0 – 1030 min
-1
at 20
°
C temp]
Self drilling screw mode
0 – 1090 min
-1
Rechargeable battery
BCL1015: Li-ion 10.8 V
BCL1030M: Li-ion 10.8 V
(1.5 Ah, 3 cells)
(3.0 Ah, 6 cells)
Dimensions of the tool
139 mm
×
216 mm
×
29 mm
139 mm
×
233 mm
×
29 mm
Entire length
×
height
×
center height
(BCL1015 attached)
(BCL1030M attached)
Weight
1.0 kg (BCL1015 attached)
1.2 kg (BCL1030M attached)
LED light
White LED
01Eng_WM10DBL_EE
12/7/11, 9:03 AM
9