As the remaining battery indicator shows somewhat
di
ff
erently depending on ambient temperature and
battery characteristics, read it as a reference.
Display panel
Switch trigger
Remaining battery
indicator lamp
Fig. 11
NOTE
Do not give a strong shock to the display panel or
break it. It may lead to a trouble.
8. How to use the LED light
While the switch is pulled, the LED light will
automatically light up the tip portion of the tool.
(Fig. 12)
The LED light will automatically turn o
ff
10 seconds
after the switch is released.
Switch trigger
Fig. 12
CAUTION
●
Do not expose directly your eye to the light by
looking into the light.
If your eye is continuously exposed to the light,
your eye will be hurt.
●
Wipe o
ff
any dirt or grime attached to the lens of
the LED light with a soft cloth, being careful not
to scratch the lens.
Scratches on the lens of the LED light can result
in decreased brightness.
(1) Removing the hook.
Remove the screws
fi
xing the hook with Philips screw
driver. (Fig. 9)
Hook
Screw
Groove
Fig. 9
(2) Replacing the hook and tightening the screws.
Install securely the hook in the groove of power
tool and tighten the screws to
fi
x the hook
fi
rmly.
(Fig. 10)
Screw
Hook
Groove
Fig. 10
7. About Remaining Battery Indicator
Remaining battery power can be veri
fi
ed by pulling on
the switch to light up the remaining battery indicator
lamp. (Fig. 11)
The indicator lamp will turn o
ff
10 seconds after the
switch is released.
The Table 5 shows the state of remaining battery
indicator lamp and the battery remaining power.
Table 5
State of lamp Battery Remaining Power
The battery remaining power is
enough.
The battery remaining power
is a half.
The battery remaining power is
nearly empty.
Re
-
charge the battery soonest
possible.
14
English
0000WH18DBFL2.indb 14
0000WH18DBFL2.indb 14
2017/08/22 12:10:31
2017/08/22 12:10:31
