manualshive.com logo in svg

Hitachi WH 12DAF, Technical Data And Service Manual

Share
Download
Hitachi WH 12DAF Technical Data And Service Manual Download Page 3

Page

CONTENTS

1. PRODUCT NAME ............................................................................................................................. 1

2. MARKETING OBJECTIVE ............................................................................................................... 1

3. APPLICATIONS ................................................................................................................................ 1

4. SELLING POINTS ............................................................................................................................ 2

4-1. Selling Point Descriptions ................................................................................................................. 2

5. SPECIFICATIONS ............................................................................................................................ 3

5-1. Specifications .....................................................................................................................................3

5-2. Optional Accessories ......................................................................................................................... 5

6. COMPARISONS WITH SIMILAR PRODUCTS ................................................................................ 6

6-1. Specification Comparisons ................................................................................................................6

6-2. Tightening Torque ..............................................................................................................................7

6-3. Number of Screws or Bolts Driven ..................................................................................................... 9

7. PRECAUTIONS IN SALES PROMOTION ..................................................................................... 10

7-1. Safety Instructions ...........................................................................................................................10

7-2. Tightening Torque Inspection Prior to Operation ............................................................................. 12

7-3. Tightening Torque Variation ............................................................................................................. 12

7-4. Suggestions and Precautions for the Efficient Use of the Charger and Storage Batteries .............. 14

8. OTHER PRECAUTIONS ................................................................................................................ 14

9. REPAIR GUIDE .............................................................................................................................. 15

9-1. Precautions in Disassembly and Reassembly ................................................................................. 15

9-2. Precautions in Disassembly and Reassembly of Battery Charger .................................................. 21

10. STANDARD REPAIR TIME (UNIT) SCHEDULES ....................................................................... 22

Assembly Diagram for WH 12DAF

Summary of Contents for WH 12DAF































Reviews:

No comments

Brands by name

Popular brands

Load more brands