7
When the TV has been tuned read the paragraph ’Initial
installation’ in the chapter ’INSTALLING YOUR VIDEO
RECORDER’.
Note:
Many televisions
automatically
switch to programme
number ’EXT’ (
EXT
ernal) ’0’ or ’AV’ (
A
udio/
V
ideo) when a
video cassette is played back.
If the television does not switch automatically, select
programme number e.g.: ’EXT’, ’0’, or ’AV’ on the TV set
manually.
Connecting without a scart cable
1
Switch off the TV set.
2
Remove the aerial cable plug from your TV set and insert
it into the
2
socket at the back of the video recorder.
3
Plug one end of the aerial cable provided into the
3
socket on the video recorder and the other end into the
aerial input socket on your TV set.
4
Insert one end of the mains cable into the mains socket
4
at the back of the video recorder and plug the other
end into the wall socket.
5
Press and hold
h
on the remote control and while
holding that button, press and hold
h/J
on the video
recorder. After several seconds the dipslay on the video
recorder will show ’
M583
’ or a similar number.
6
Switch on your TV set and select the programme number
that you have chosen for video playback (see instruction
manual TV set).
7
Tune in the TV set until this picture appears.
8
Switch off the video recorder with
STANDBY
m
.
Note:
If the picture quality of TV channels on your TV is
poor, please read the section ’Reducing picture disturbance
- optimizing the modulator’ in the chapter ’ADDITIONAL
FUNCTIONS’.
9
When the TV has been tuned read the paragraph ’Initial
installation’ in the chapter ’INSTALLING YOUR VIDEO
RECORDER’.
Connecting other equipment
You can connect additional equipment to the
AV1 EXT1
socket.
For instance: satellite receiver or camcorder.
Note:
In the section ’Connecting without a scart cable’ you
can find information about how to connect your TV.
4
