Hitachi VTFX240EUK, User Manual, Page: 17 / 22

16
EN
QUICK-FIND
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• Use the remote control for this procedure.
• The tape must be fully rewound.
Press QUICK-FIND .
TO SKIP TO THE BEGINNING OF NEXT PROGRAMME
Press QUICK-FIND .
TO VIEW AT NORMAL SPEED
Press PLAY/
o o
. The Quick-Find is cancelled.
NOTES:
• This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in progress,
press STOP/
L L
.
• When the end of a tape is reached during the Quick-Find,
the tape will automatically rewind to the beginning. After
rewinding finishes, the VCR will eject the tape and turn
itself off.
1
INDEX SEARCH
• The index mark will be made automatically when REC is
pressed. It will also be marked at the starting point of
Timer recording and OTR.
• The index mark is not recorded if the PAUSE/STILL is
pressed and released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for
LP recording.
• Use the remote control for this procedure.
Press INDEX SEARCH.
Press PLAY/
o o
, STOP/ L L or INDEX SEARCH repeatedly
until the number of programmes that you want to skip
appears.
Press
REW/
s
or F.FWD/
B
.
The VCR begins rewinding or fast forwarding to the
beginning of desired programme.
When the preset programme is reached, the VCR will start
playback automatically.
NOTES:
• Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds, from
steps to . Otherwise the Index Search mode will be
cancelled.
• To exit the Index Search mode, press MENU in step . Or
press STOP/ L L after step .
3
2
3 2
3
2
1
TIME SEARCH
If a tape includes both programmes recorded in the PAL sys-
tem and ones recorded in the NTSC system, this function
may not be operated correctly.
• Use the remote control for this procedure.
Press TIME SEARCH.
Press PLAY/
o o
, STOP/ L L or TIME SEARCH repeatedly
until the desired time appears.
Press
REW/
s
or F.FWD/
B
.
The VCR begins rewinding or fast forwarding to the speci-
fied point.
When 0:00 is reached, the VCR will start playback automati-
cally.
NOTES:
• Time Search can be set up to 9 hours 59 minutes (9:59).
When you press TIME SEARCH in step , it will increase
the time by 15 minutes. In this case, Time Search can be
set up to 9 hours 45 minutes (9:45).
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds, from
steps to . Otherwise the Time Search mode will be
cancelled.
• To exit the Time Search mode, press MENU in step . Or
press STOP/ L L after step .
3
2
3 2
2
3
2
1