USING THE "INDEX" FEATURE
48
USING
THE
"INDEX"
FEATURE
To find specific sections on a tape using the "INDEX" feature
Jump to an Index Mark with INDEX
A quick way to access specific program segments is with the index search feature. This lets
you move through a tape that has several recordings on it by searching for the INDEX "mark".
This function only works with recordings that have been set up with indexing. You create an
INDEX mark (VISS signal) every time you press the REC or REC/IRT button while recording.
1 Press the DISPLAY button in the stop mode.
The index screen appears on TV.
2 Press the (7) button for rewind or the (9) button for forward to begin the index search.
• The tape rewinds or fast forwards until an index mark is detected. During this search, the
word INDEX is displayed at the top left corner of the screen.
• When the VCR finds an index mark, it plays 15 seconds of the program that begins at that
spot.
3 If this is the program you were looking for, press the PLAY button for normal
playback.
• To stop the index search before an index mark is reached, press the STOP button.
