Hitachi VT-UX605A Owner'S Manual Download Page 50 | Manualshive

Page: 50 / 83

background image

Basic Operations (Tape Navigation)

- 50 -

2. Turn the TV on and select the video channel (3 or 4).
3. Make sure that the green MENU button indicator on the VCR lights. (It lights to show
that Tape Navigation is operational.)
4. Press the MENU button on the remote control or VCR. The directory will appear. The
directory interpretation is listed on the next page.

This VCR can store about 80 programs including blanks in memory.
There may be a difference of within about three minutes between the displayed

recording time and the actual time.

The recording data may not appear even with a tape recorded by this VCR. In this

case, perform the following:
A, Rewind the tape to the beginning and press the MENU button.
B, Rewind or fast forward the tape to the section which was recorded by this VCR, then
press MENU.

Interpreting the Directory

Tape No.:

Shows the tape control number

No. of Programs:

Shows the number of recorded programs on the tape

Tape Bar:

Shows the length of a recorded program and its location on

tape.
Recording Time:

Shows the actual recording time. If the tape speed (EP/SP)

is changed during recording, the recording mode indicator

is switched to "- -" and the recording time in the EP mode

will

be

displayed.

Recording Channel/Recording Date/Recording Day of the Week/Recording Start
Time/Program Title:

If the broadcast program does not have a program title signal, these will be displayed.

If the clock has not been set, "- - / - -" "- - : - -" will be displayed.
If you use a cable box to receive programs, the VCR's output channel is always displayed

whichever channel is recorded.

When a broadcast program with a program title signal is recorded, program title appears. If

the title is too long, all the title characters may not be displayed
Operating Guide:

Shows the button names and the operations that can be

done when the directory is being displayed.

Blank:

Shows the non-recorded section (time for which a new

recording

can

be

made).

Displays the time for which

recording is possible in the EP speed mode.

Program No.:

Shows the registered number of a recorded program. The

selected number is displayed, inverted (in black against a

white

background).

Mark Showing That You Have Viewed the Program (

):

Shows that you have already viewed more than half of the

«
...
48
49
50
51
52
...
»

Summary of Contents for VT-UX605A




















































































Reviews:

No comments

Related manuals for VT-UX605A

27MDTR20 - Tv/dvd/vcr Combination

Brand: Magnavox Pages: 4

Brand: JVC Pages: 20

Brand: JVC Pages: 16

Brand: JVC Pages: 16

HR-S9911U - S-VHS Hi-Fi Stereo VCR

Brand: JVC Pages: 32

Brand: JVC Pages: 54

Brand: JVC Pages: 52

Brand: JVC Pages: 60

Brand: JVC Pages: 76

Brand: JVC Pages: 84

Brand: JVC Pages: 76

Brand: JVC Pages: 76

Brand: JVC Pages: 76

Brand: JVC Pages: 87

Brand: JVC Pages: 88

Brand: JVC Pages: 88

Brand: JVC Pages: 90

Brand: JVC Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands