16
CHANNEL SET UP (Automatic)
Plug in the VCR power cord
Plug the VCR power cord into a standard AC outlet. The "- - : - -" indicator flashes on the display.
Remember:
If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you
DO NOT have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have the
CH3/CH4 switch on the back of the VCR to match the channel you selected (CH 3 or CH 4). Now select
the Box to the channel you wish to view or record.
2 Select channel 3 or 4 on the TV
Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to
match the channel selected on the TV.
3 Turn on the VCR
Press the POWER button to turn on the VCR. Both the "PWR." indicator and the "VCR" indicator on the
display come on.
•
Use the remote control for this procedure.
4 Select 'ENGLISH" or "ESPANOL"
Select "ENGLISH" or "ESPANOL"=Spanish by using the PLAY/
or STOP/
button. Then, press the
F.FWD/
button.
NOTE:
This function effects only the language on the screen menu and not the audio source.
LANGUAGE SELECT
→
ENGLISH [ON]
ESPANOL
5 Begin Channel preset
Press the F.FWD/
button once. The tuner scans and memorizes all active channels in your area.
• The VCR distinguishes between standard TV channels and cable channels.
CH 01
AUTO SET UP
6 After scanning
The tuner stops on the lowest memorized channel. The TV screen returns to TV mode.
• If "AUTO SET UP'. appears on the TV screen again, check the cable connections. Press the F.FWD/
button once again and the VCR will begin preset again.
CH 01
TO SELECT A DESIRED CHANNEL
You can select the desired channel by using the CHANNEL(CH)
or
button or directly pressing the
number buttons on the remote control.
Note for using the number buttons:
•
When selecting cable channels which are higher than 99, press the + 100 button first, then press the last
two digits. (Example: to select channel 125, first press the +100 button then press "2" and "5").
• You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).
Summary of Contents for VT-MX4510
Page 20: ...20 ...
