Hitachi VT-M190A, Owner'S Manual

Page: 24 / 91

CONTROLLING VCR INPUT & OUTPUT
24
CONTROLLING VCR INPUT & OUTPUT
VIDEO OUTPUT CHANNEL SETTING (BACK OF VCR)
When the VCR is in the Playback mode, or when the VCR/TV button is in the VCR
position, you TV will receive the signals from the VCR on either channel 3 or 4. Set the
3CH/4CH selector switch to the station that is not used for normal broadcasts in your
area; then set your TV to that same channel when viewing from the VCR.
The video output channel of this unit is set to channel 3 prior to shipment from the
factory.
INPUT SELECT
To use the external input jack, select the AUX position. Press CHANNEL " " or " "
button or enter "00" with number button so that "AUX" appears on the screen.
VIDEO MODE SELECTION ON TV
TV power must be on. Please see your TV's owner's manual for details.
To Set your TV to the Video Mode
Connection Using AV cord (Refer to page 14.): Set your TV to the Video Mode using
VCR/TV button on you TV. To set your TV to the TV mode, press VCR/TV button of
your TV again.
Connection Without AV Cord (Refer to page 12, 13, 15): Set the TV channel to the
same video output channel located on the back of the VCR. (CH 3 or 4) Then, set your
VCR to the VCR mode using VCR/TV button of your VCR.