Hitachi VT-FX685A, Service Manual, Page: 47 / 67

DISASSEMBLY/ASSEMBLY PROCEDURES
OF DECK MECHANISM
Before following the procedures described below, be sure to remove the deck assembly from the cabinet. (Refer to
CABINET DISASSEMBLY INSTRUCTIONS on page 1-6-1.)
All the following procedures, including those for adjustment and replacement of parts, should be done in Eject mode;
see the positions of [48] and [49] in Fig. DM1 on page 2-4-3. When reassembling, follow the steps in reverse order.
STEP
/LOC.
No.
START-
ING
No.
PART
REMOVAL INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
[1] [1] Top Plate T DM3 2(S-1), *2(L-1)
[2] [1] Cassette Holder Assembly T DM4 (S-19)
[3] [2] Slider L T DM5 (S-2)
[4] [2] Slider R T DM5 (S-3)
[5] [4] Lock Lever T DM5 (S-4), *(P-1)
[6] [2] Cassette Plate T DM5
[7] [7] Cylinder Assembly T DM1, DM6
3(S-5),
Connector A,
Connector B
[8] [8] Loading Motor Assembly T DM1, DM7
2(S-6), (S-7), LDG
Belt, ACH Connector
AN(9P) and 9B
[9] [1] Tape Guide Assembly T DM1, DM8 *(P-2), (C-8)
[10] [1] Door Opener B T DM1, DM8 (S-8), *(L-2)
[11] [10] Pinch Arm (B) Assembly T DM1, DM8 *(P-3)
[12] [11] Pinch Arm (A) Assembly T DM1, DM8
[13] [13] FE Head T DM1, DM9 (S-9)
[14] [14] First Post Assembly T DM1, DM9 (S-10)
[15] [15] Prism T DM1, DM9 (S-11)
[16] [16] Standard Post T DM1, DM9 *(L-4)
[17] [1] Slider Shaft T DM10 (S-12), *(L-7)
[18] [17] C Drive Lever L T DM10
[19] [17] C Drive Lever R T DM10
[20] [1] Capstan Motor B DM2, DM11 3(S-14), Cap Belt
[21] [21] FF Arm Holder B DM2, DM12 (S-15)
[22] [22] Clutch Assembly B DM2, DM12 (C-1)
[23] [22] Center Gear B DM12
[24] [24] Cam Holder B DM2, DM13 (C-2)
[25] [24] F Brake Assembly B DM2, DM13
[26] [26] Cam Gear (B) B DM2, DM13 (C-3), *(P-4)
[27] [27] Mode Gear B DM2, DM14 (C-4)
[28] [27] Mode Lever B DM2, DM14 (C-5)
[29] [29] Worm Holder B DM2, DM14 (S-16)
[30] [30] Pully Assembly B DM2, DM14
[31] [29] Cam Gear (A) B DM2, DM14
2-4-1