10. REC button– Press for manual recording.
IRT button– Press to activates Instant Recording
Timer. (only on the VCR)
11. NUMBER buttons– Press to select desired chan-
nels for viewing or recording. To select channels
from 1 to 9, first press "0" button then 1 to 9. (only
on the remote control)
+100 button– When selecting cable channels which
are higher than 99, press this button first, then press
the last two digits. (To select channel 125, first press
"+100" button then press "2" and "5"). (only on the
remote control)
ENTER– (only on the remote control)
12. TAPE SPEED button Press to choose the desired
recording speed : SP/SLP. (only on the remote control)
13. MENU button– Press to display the menu on the TV
screen. Press to exit the menu on the TV screen.
(only on the remote control)
14. DISPLAY button– Press to display the current time,
channel number, real time tape counter, and other
information on the TV screen. (only on the remote
control)
Each time you press this button, TV screen will
change as shown. The status display (STOP, PLAY
etc.) and the tape speed display (SP, LP (playback
only), or SLP) will disappear after 5 seconds.
15. COUNTER RESET button– Press to reset counter
to 0:00:00. (only on the remote control)
EXIT button– Press to exit the menu on the TV
screen. (only on the remote control)
16. COUNTER MEMORY button– Press to set counter
memory on and off. (only on the remote control)
17. SEARCH MODE button– Press to perform a Time
Search or an Index Search. (only on the remote con-
trol)
18. PAUSE button– Press to temporarily stop the tape
during recording or to view a still picture during
playback. (only on the remote control)
Frame Advance function– Press to advance the
picture by one frame at a time during the still mode.
(only on the remote control)
19. SLOW button– Press to start slow motion playback.
(only on the remote control)
20. MUTE button– Press to mute the TV’s sound. Press
it again to resume the sound. (only on the remote
control)
21. VOL(ume) buttons– Press to adjust the desired
TV’s volume level by using either
▲
or
▼
button.
(only on the remote control)
22. VCR/TV button– Press to select TV or VCR mode.
(only on the remote control)
VCR position: to view playback, to monitor video
recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view one program
while recording another.
23. MODE SELECT buttons
(only on the remote control)
CATV button
TV button
VCR button
24. VCR Plus+ button– Press to program the automat-
ic timer recording using the VCR Plus+ system.
(only on the remote control)
25. Power cord– Connect to a standard AC outlet
(120V/60Hz).
26. AUDIO OUT jacks– Connect to the audio input
jacks of your audio equipment or another VCR.
27. AUDIO IN jacks– Connect to the audio output jacks
of your audio equipment or another VCR.
28. ANT. IN terminal– Connect to an antenna, Cable
system or Satellite system.
29. VIDEO OUT jack– Connect to the video input jack
of your video camera or another VCR.
30. VIDEO IN jack– Connect to the video output jack of
your video camera or another VCR.
31. CH3/CH4 selector switch– Use to select a video
output channel (3 or 4) for VCR playback.
32. ANT. OUT terminal– Connects to the antenna input
terminal on your TV.
STOP
SP
0:12:34
STOP
SP
5:40PM
CH 02
<COUNT mode>
<CLOCK mode>
Press
once
<OFF mode>
Press
once
Press once
1-5-2
Summary of Contents for VT-FX685A
