45
control.
PROGRAMMING THE VCR REMOTE TO CONTROL YOUR CABLE BOX
The VCR remote control can be programmed to control many cable boxes that are
remote controlled. YOu can easily change channels.
1 Turn on the cable box.
2 Point VCR remote control toward cable box.
3 Press and hold the "CATV" button.
4 Press the remote button corresponding to your cable box as shown in the set-
up chart. The cable box channel will change to confirm that the remote control
has been set.
Cable Box Press "CATV" and
this
number
button
Jerrold 1
1
Jerrold 2
2
Jerrold 3
3
Hamlin 4
Zenith
5
Scientific Atlanta
6
Pioneer 7
Philips
8
Note:
If your cable box is not listed on the Set-Up Chart, try all the buttons listed in the chart