1. Connect the management ports on controller 1 and controller 2 to a management (non-production) network.
2. Configure the management console to use an IP address of 192.168.0.18 and a subnet mask of 255.255.255.0.
Next steps
Change the storage system's default password.
Changing the password
Procedure
1. On your management console PC or laptop, open a web browser and enter the following IP address:
192.168.0.16
2. Enter the default user name and the password sent with the system, and then press the Enter key to log in to
Hitachi Storage Advisor Embedded. Contact customer support for the default user name and password if missing.
If the login window does not appear, check whether the browser is configured to allow pop-ups. If pop-ups are
allowed, make sure the management console IP address is set to 192.168.0.18 and the subnet mask is set to
255.255.255.0. If the IP address and subnet mask are correct and pop-ups are allowed, but the login window does
not appear, contact customer support.
3. In the top-right corner, click the gear icon, and then select User Administration.
4. Click Support Personnel Group.
Updated: Thu, 06 Jan 2022 00:49:25 GMT
Powered by
8