Hitachi Virtual Storage Platform F400, System Administrator Manual, Page: 257 / 368

Item Content
Authentication of Group Information about whether to perform authentication or not
■
Enabled
■
Disabled
Initiator Username WWN information about the host required for authentication (16-digit
hexadecimal number)
Protocol Protocol used for authentication ("CHAP" or blank)
FcSpPortInfo.csv
This CSV file contains information about ports related to Fibre Channel Security Protocols
(FCSPs). A record is created for each port.
For details of port setting, see the
Provisioning Guide . Information about the NAS module
is not displayed in this CSV file.
Table 30 FcSpPortInfo.csv file (Title: <<FC-SP Port Information>>)
Item Content
Port Port name
Time out(Sec) Time interval (in seconds) before retrying authentication in case of failure
in authentication
Refusal Intvl.(Min) Time interval (in minutes) before starting next authentication in case of
failure in authentication for the number of times displayed by "Refusal
Freq(Counts)"
Refusal Freq.(Counts) Number of times of authentication allowable for connection to a port
Switch Port Username WWN information about the Fabric switch required for authentication (16-
digit hexadecimal number)
Mode Mode of authentication between ports and FC switches
■
Bidirectional
■
Unidirectional
Authentication of Fabric
Switch
Information about whether to perform authentication of the FC switch
identified by "Switch Port Username"
■
Enabled
■
Disabled
FcSpPortInfo.csv
Appendix A: Examples of storage configuration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 257