Hitachi Virtual Storage Platform F400, System Administrator Manual, Page: 155 / 368

4. Browse to the certificate file and click Open . The File Upload window closes and
returns you to the Update Certificate Files dialog box.
5. In the Web Server Password: field, enter the certificate password.
6. Enter the password again in the Web Server Re-enter Password: field.
7. Select a Connect to SVP certificate file to update. Click the Connect to SVP
checkbox, then click Browse .
8. Browse to the certificate file and click Open . The File Upload window closes and
returns you to the Update Certificate Files dialog box.
9. In the Connect to SVP Password: field, enter the certificate password.
10. Enter the password again in the Connect to SVP Re-enter Password: field.
11. Click Apply to update the certificates.
Releasing HTTP communication blocking
If the web server supports SSL (HTTPS), you can use the HTTP setting tool to release a
block to the HTTP communication port as needed.
Before you begin
■
You must have the Storage Administrator (Initial Configuration) role to perform this
task.
■
You must be logged into the SVP.
Procedure
1. Close all Device Manager - Storage Navigator sessions on the SVP.
2. Open a command prompt window with administrator permissions.
3. In the folder where the HTTP setting tool is located, execute the following
command:
C:\MAPP\wk\Supervisor\MappIniSet>MappHttpRelease.bat
4. A completion message box displays. Press any key to acknowledge the message and
close the message box.
Releasing HTTP communication blocking
Chapter 5: Setting up security
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 155