-6-
7. REPLACEMENT OF LAMP, LAMP CAP AND LAMP COVER
Turn the switch off and remove the battery before replacement (Fig. 2).
7-1. Replacement of the Lamp
(1) Remove the Lamp Cover
[1]
by tuning it counterclockwise in
C
direction (Fig. 3).
(2) Remove the Lamp Cap
[2]
and the Reflector Sheet
[5]
at the tip of the Lamp
[3]
and pull out
the Lamp
[3]
(Fig. 1).
(3) Securely insert the new Lamp
[3]
and reinstall the Lamp Cap
[2]
to the tip of the new
Lamp
[3]
and the Reflector Sheet
[5]
(Fig. 1).
(4) Reinstall the Lamp Cover
[1]
by turning it clockwise in
D
direction without twisting the
Lamp Cap
[2]
. If the Lamp Cap
[2]
is twisted, check whether the Lamp
[3]
is properly
inserted or not again.
* The Lamp Cap
[2]
is provided at the tip of the Lamp
[3]
to prevent breakage of the
lamp in case of accidental drop of the Model UB 18DSL. Be sure to reinstall the Lamp
Cap
[2]
to the new Lamp
[3]
.
7-2. Replacement of the Lamp Cover
(1) Remove the Lamp Cover
[1]
by tuning it counterclockwise in
C
direction (Fig. 3).
(2) Install the new Lamp Cover
[1]
by turning it clockwise in
D
direction without twisting the
Lamp Cap
[2]
.
7-3. Replacement of the Lamp Cap
(1) Remove the Lamp Cover
[1]
by tuning it counterclockwise in
C
direction (Fig. 3).
(2) Remove the Lamp Cap
[2]
from the tip of the Lamp
[3]
and install the new Lamp Cap
[2]
to
the tip of the Lamp
[3]
.
(3) Install the new Lamp Cover
[1]
by turning it clockwise in
D
direction without twisting the
Lamp Cap
[2]
.