Hitachi StarBoard FX-DUO-77, User Manual

Page: 10 / 47

10
Safe Handling
StarBoard FX-DUO-77
English
Careful thought was given to the cautions on this device and in this User's Guide. However, unanticipated
circumstances might occur. When operating this product, users themselves must exercise caution as well
as follow instructions.
Precaution Contents Page(s)
Tighten the screws securely.
Failure to comply may cause the stand to collapse, resulting in personal injury,
or may cause damage to this product due to shock of impact from the board
falling.
P. 1-8
Tighten the screws securely.
Failure to comply may cause the board to fall, resulting in personal injury, or
may cause damage to this product due to shock of impact from the board
falling.
P. 1-9
Be sure to use two or more people for this work.
Failure to comply may cause the board to fall, resulting in personal injury, or
may cause damage to this product due to shock of impact.
P. 1-9
P. 1-10
P. 1-12
Keep the wall material in mind when installing.
Installation by means not suited to the wall material in question may result in
the board falling.
Furthermore, wall installation may not be possible depending on the wall. For
details, consult with your dealer.
P. 1-11
Keep the wall strength in mind when installing.
Only use this product after confirming that it is securely attached and will not
fall. Furthermore, be sure to install using a wall-mounting bracket capable of
supporting a weight of at least 40 kg.
P. 1-11
Do not strike the board forcefully with the stylus pen, bend
it, or apply an excessive load to it.
Failure to comply may result in damage to the stylus pen or personal injury.
P. 2-3
Be sure to install batteries correctly.
Do not install batteries with positive and negative terminals reversed, or use
batteries other than the type specified. Failure to comply may result in
overheating or damage to this product.
P. 2-4
Be sure to provide insulation during disposal.
Be sure to insulate the positive and negative terminals of the battery using
cellophane tape, or similar material when disposing of batteries. Disposing of
batteries without insulating them may lead to overheating, bursting, or ignition
due to shorting, resulting in personal injury or fire. Furthermore, be sure to
follow all local rules and regulations regarding proper battery disposal.
P. 2-4
CAUTIONS