1-12
StarBoard FX-DUO Series
Introduction
English
[2] Install the board
Attach the wall-mounting brackets to the top square holes (both sides) of the stays on the back
of the board.
[3] Settle the board (The following work is necessary for FX-DUO-88W.)
1.
Make sure that the 2 wall-mount stabilizing sponges are touching the wall when the
board is mounted on the wall.
If either of the sponges do not touch the wall, apply the sponge mat (large) to the
wall-mount stabilizing sponge, and adjust the space between the sponge and the wall.
CAUTION
Be sure to use two or more people for this work.
Failure to comply may cause the board to fall, resulting in personal injury, or may cause
damage to this product due to shock of impact.
Wall-mount stabilizing sponge
Remove the tape cover
Sponge mat (large)
Tape cover
Summary of Contents for StarBoard FX-DUO-63
Page 12: ...StarBoard FX DUO Series English ...