1-8
StarBoard FX-DUO Series
Introduction
English
1.4.1 Stand Setup Method
Reconfirm that all the parts are present before assembling and setting up the stand (option).
FX-DUO-88W is only for the wall-mounting. Do not use FX-DUO-88W with the stand.
[1] Assemble the stand
FX-DUO-77/FX-DUO-63 are available with the stand.
Assemble the stand according to the following diagram. The numbers in the diagram
correspond to the numbers in the parts list on page 1-3.
CAUTION
Tighten the screws securely.
Failure to comply may cause the stand to collapse, resulting in personal injury, or may
cause damage to this product due to shock of impact from the board falling.
Important
FX-DUO-88W is only for the wall-mounting. Do not use FX-DUO-88W with the stand.
(1)
(2)
(3)
(4)
(5)
(7)
(8)
(9)
(7)
Fasten with a
Hexagonal
wrench.
Fasten with a
Phillips screwdriver.
Align both feet with the
longer side facing forward.
Long
Short
Summary of Contents for StarBoard FX-DUO-63
Page 12: ...StarBoard FX DUO Series English ...