17
CPX4(M1-20WL)
NO
NO
PWB assembly MAIN
PWB assembly MAIN
Refer your wireless LAN device’s
installation manual, and install
wireless LAN device’s driver again.
Change the WIRELESS NETWORK
UNIT and your PC’s wireless channel
setting differ to other PC or something,
And change SSID except for “wireless”.
(When you change SSID, we recommend
to use wired LAN for running “Setting Utility”)
(Refer Fig.3)
How to change into wired LAN.
(1) Use MIU SETUP - NETWORK MODE
(2) Remove SD WLAN card, turn off the
power switch, and then turn on the power switch.
YES
YES
Change PC’s IP address setting to “192.168.1.N”
(N:1 to 9 or 11 to 254) And check wired LAN
connection when wireless LAN is disabled.
Point to be checked : If you set PC’s IP address setting to
“192.168.1.50”, input in MS-DOS prompt to “ipconfig” and
response the same IP “192.168.1.50”. (Refer Fig.4)
A
Can you connect via
wired LAN ?
NO
Are there any other
PC or something using
wireless LAN?
YES
Is the
wireless LAN
device installed correctly on
your PC?
Summary of Contents for SM0328
