16
Item
no.
Function
Switch
Operating procedure
１ ６
Manual adjustment
・
Select adjustment items with the manual
control section switches. The display
section shows the adjustment item and
value.
・
Use the rotary encoder to adjust the items
for optimum values.
*
Adjustment
CTL VALUE ・
When the
CTL VALUE
switch is on, the
value display
adjustment value is displayed from -100 to
+100.
【
Display example
】
1
Detail Adjustment
【
Display
】
(1)DTL LEVEL
DTL 1
TOTL: Total detail level adjustment
H: H detail level adjustment
V: V detail level adjustment
(2)LEVEL DEP /
DTL 2
・
Press again the switch for the following
BOOST FREQ
display.
LDPP: Dark component noise due to detail
reduced
FREQ: Adjusts detail boost frequency (13 M to 19
M).
(3)CRISP /
DTL 3
・
Press Again the switch for the following
DTL SOURCE
display.
H-CR: Noise component reduction due to H.
detail.
V-CR: Noise component reduction due to V. detail.
SRC: Detail signal source (R,RG,RGB)
selection.
LEVEL-DEP / FREQ
LDPP FREQ
GAIN
-20 0 +10
DETAIL LEVEL
TOTL H V
CRISP / SOURCE
H-CR V-CR SRC
