Operation Instructions
5
Operation Instructions
◆
Setting Method
(Temperature, Fan Speed and Air Louver Direction)
ATTENTION
DO NOT touch the CHECK switch.
●
The CHECK switch is used only when servicing.
●
In case that the CHECK switch is pressed by
mistake and the operation mode is changed to the
check mode, press the CHECK switch again for
approximately 3 seconds, and press the CHECK
switch once again after 10 seconds, and the
operation mode is changed to the normal condition.
Setting of Temperature
Adjust the temperature by pressing TEMP "
∧
" or "
∨
"
switch.
(Indication when setting 28
℃
)
The temperature is increased by 1
℃
by pressing "
∧
"
switch (Max.30
℃
).
The temperature is decreased by 1
℃
by pressing "
∨
"
switch (Min.19
℃
).
Setting of Fan Speed
Press the FAN SPEED switch.
(Indication when setting " MED " speed)
By repeatedly pressing the FAN SPEED switch, the
indication is changed in order of HIGH, MED and
LOW.
For standard operation, set the fan speed at HIGH.
NOTE
In case of DRY mode, the fan speed is automatically
changed to LOW, and can not be changed (However.
the indication shows the present setting condition.).
Setting of Swing Louver Direction
Press the SWING LOUVER switch, the swing louver
starts to swing.
Press the SWING LOUVER switch again, the swing
louver is fixed.
By repeatedly pressing the SWING LOUVER switch,
the swing louver repeats to stop and swing.
< When Swinging Automatically >
The indications move continuously corresponding to
the louver swing.
