RPK-(0.4-1.5)FSN(H)4M
1
Removing flat panel
Hold both sides of flat panel and open it fully. After the right arm
shaft is expanded outward and the shafts are removed from the
front panel, pull the flat panel frontward while the right arm shaft
is expanded outward.
Remove this part from
the hole
Expand the shaft
toward arrow
direction
Flat panel
2
Attaching flat panel
Insert completely the left and right arm shafts of flat panel
into the holes along the guide at the front panel. After the flat
panel is attached completely, insert the catches for air filter
to fix.
Flat panel
Hole
Guide at
front panel
Front panel
RPK-(2.0-4.0)FSN4M
1
Removing flat panel
Hold both sides of flat panel and open it fully. After the right arm
shaft is pushed inward and the shafts are removed from the front
panel, pull the flat panel frontward while the right arm shaft is
slightly pushed inward.
Remove this
part from the
hole
Push the shaft
toward arrow
direction
Flat panel
2
Attaching flat panel
Insert completely the left and right arm shafts of flat panel
into the holes along the guide at the front panel. After the flat
panel is attached completely, insert the catches for air filter
to fix.
Hole
Guide at
front panel
Front panel
Flat panel
11.2 MAINTENANCE BEGINNING AND ENDING OF USE
Beginning of use
• Remove obstacles for the air inlet grilles of indoor unit and
outdoor unit and the air outlet.
•
Check that the air filter is not clogged.
Ending of use
Clean the air filter, the air inlet grille and the flat panel.
MAINTENANCE
PMML0498 rev.1 - 11/2018 - P5417093
9
ENGLISH
