manualshive.com logo in svg

Hitachi RPFC-3.0UFE1NH, Installation & Maintenance Manual, Page: 3 / 28

Share
Download
Hitachi RPFC-3.0UFE1NH Installation & Maintenance Manual Download Page 3

Contents

  Safety Precautions .....................................................................................................................................1
  Composition of the Air conditioner ..............................................................................................................7
  Operation Manual .......................................................................................................................................9
Special Remarks ..........................................................................................................................................9
Troubleshooting ............................................................................................................................................9
  Installation and Maintenance .................................................................................................................... 11
1  Safety Notice .......................................................................................................................................... 11
2  Tools and Instruments for Installation .....................................................................................................12
3  Installation of the Indoor Unit ..................................................................................................................12

3.1  Before Installation ............................................................................................................................................... 12

3.2  Installation location ............................................................................................................................................. 14

3.3 Installation ........................................................................................................................................................... 14

4  Refrigerant Pipe ......................................................................................................................................17

4.1  Pipe material ....................................................................................................................................................... 17

4.2  Piping connection ............................................................................................................................................... 17

5  Drain piping ............................................................................................................................................18
6  Electrical Wiring ......................................................................................................................................19
7  Attaching the air return grille ...................................................................................................................19
8  Electrical installation ...............................................................................................................................20
9  Test Run..................................................................................................................................................20

Summary of Contents for RPFC-3.0UFE1NH





























Reviews:

No comments