English
15
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may a
ff
ect the power tool
ʼ
s
operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations di
ff
erent from those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by a quali
fi
ed repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
CAUTION
Keep children and in
fi
rm persons away.
When not in use, tools should be stored out of reach of children and in
fi
rm persons.
HEAT GUN SAFETY WARNINGS
WARNING
1. Do not use the tool or touch the power plug with wet hands.
Failure to observe this may result in electric shocks.
2. Always check the work area prior to use, and do not use the tool if safety cannot be
guaranteed.
Failure to observe this may result in in
fl
ammable articles concealed in or behind
invisible areas (cases, ceilings,
fl
oors, hollow areas) being ignited.
3. Do not use the tool in the vicinity of volatile substances (thinner, gasoline, etc.)
Failure to observe this may result in the outbreak of
fi
re or explosions.
4. Do not stand underneath when using the tool in elevated locations.
Also, do not catch the power cord on anything, or allow it to be pulled.
Failure to observe this may result in accidents.
000Book̲RH600T̲ChS.indb 15
000Book̲RH600T̲ChS.indb 15
2016/07/19 13:49:42
2016/07/19 13:49:42
