Menu
Schedule Timer
Simple Timer
Function 3
Elevating Grille
01
/
03
Filter Sign Reset
15:10(Fri)
ENT.
RTN.
SEL.
OK
• Select “Yes” by pressing “ ” or “ ” and press “OK”. The
indication of “FLTR” will be turned OFF and the screen will
return to the normal mode.
FLTR
OK
Reset filter sign?
Filter Sign Reset
Yes
No
SEL.
ENT.
RTN.
6.1.2
Removing, attaching and cleaning air
inlet grille
?
N O T E
• Wipe the air inlet grille with a soft cloth soaked in lukewarm water
and squeezed.
• Use a soft cloth to clean the air inlet grille and the air panel. If
benzine, thinner or detergent (with surfactant) is used to cleaning, the
resin part may get discoloured or deformed. In addition, note that the
parts around the air outlet (louver, guide, etc.) may be damaged if an
excessive force is applied.
The air inlet grille can be removed and cleaned.
1
Open the air inlet grille.
While sliding the knobs on both side of the air inlet grille in
the arrow direction, open the air inlet grille.
Knobs
Air Inlet Grille
Knobs
Air inlet grille
2
Remove the air inlet grille.
•
Remove the supporting string from the air panel.
Supporting String
Supporting string
• Open the air inlet grille at an approximately 45° angle from
the air panel surface.
•
Tilting the air inlet grille, lift it up to remove it.
?
N O T E
Although the air inlet grille can be opened up to 90°, it cannot be removed
from the air panel at the angle. Tilt it at a 45° angle when removing it.
45
o
Air panel
Ceiling
Tilting the air inlet grille, lift it up to remove it
3
Clean the air inlet grille.
4
Attach the air inlet grille.
Attach the air inlet grille in the reverse procedure to
removing.
6.2 MAINTENANCE AT BEGINNING AND END OF USE
At beginning of use
•
Remove obstacles around the air inlet grilles and the air
outlet of the indoor unit and outdoor unit.
• Check that the air filter is not clogged with dust and dirt.
At end of use
• Clean the air filter, the air inlet grille and the air panel.
MAINTENANCE
PMML0550 rev.0 - 12/2020
5
EN
