-8-
Reassembly can be accomplished by following the disassembly procedures in reverse. However, special
attention should be given to the following items.
1. Reassembly of the power supply unit
2. Reassembly of others
Reassembly can be accomplished by following the above disassembly procedure in reverse.
Machine Screw M4 x 10
[8]
------------------------------------------------------------ 1.8
±
0.4 N
•
m (18
±
4 kgf
•
cm)
Tapping Screw D3.5 x 15
[14]
--------------------------------------------------------- 1.6
±
0.3 N
•
m (16
±
3 kgf
•
cm)
Tapping Screw D3.5 x 15 (Black)
[18]
----------------------------------------------- 1.6
±
0.3 N
•
m (16
±
3 kgf
•
cm)
Tapping Screw D3.5 x 20 (Black)
[20]
----------------------------------------------- 1.6
±
0.3 N
•
m (16
±
3 kgf
•
cm)
Nut M6
[16]
------------------------------------------------------------------------------- 4.9
±
1.0 N
•
m (50
±
10 kgf
•
cm)
2. Precautions in disassembly and reassembly of battery charger
Refer to the Technical Data and Service Manual for precautions in disassembly and reassembly of the
battery charger Model UC 18YRL.
Reassembly
Screw tightening torque
Perform wiring according to the wiring diagram.
Micro Switch
[2]
Battery Holder
[7]
Motor (W/Spindle)
[11]
Motor Holder (B)
[10]
Black
Red
Red
