– 11 –
EN
G
L
ISH
INSTALLATION OF WIRED REMOTE CONTROLLER
1. When connecting the wires via the wall’s
recessed slot;
Á
Fix the bottom casing to the wall by
provided screw.
Á
Assemble the top casing to the fixed
bottom casing.
(Refer to the illustration below for detail
installation)
Lead wires (3 strands)
are inserted through and
fastened via a rib-clip
Location of wall
mounting screw
Lead wires connector
Wires
Wires
Lead wires
connector
Wall recessed wiring installation (Supplied)
W
a
ll
mo
u
n
ti
n
g
scre
w
s
(2
p
ie
ce
s
to
b
e
u
se
d
)
(p
ro
vi
d
e
d
)
Inside top wiring installation (Alternative)
Wires
W
ire
s
Lead wires
(3 strands)
Lead wires
connector
Wiring installation illustrations
2. When the wires to be connected from the inside top portion
of top casing;
Á
Break off a perforated aperture located at the top portion
of the bottom casing by nipper. Smoothen the aperture
by cutter.
Fix the bottom casing to the wall by provided screw.
Á
Connect the wires to the lead wires connector.
Á
Mount the wires through the provided slot on top casing.
Á
Assemble the top casing to the
Þ
xed bottom casing
(Refer to the illustration below for detail installation)
Wall
mounting
screws
(2 pieces)
(provided)
(a) Connection to the electrical box;
●
Remove the cover of electric box
●
Connect the connector of wired remote controller to CN1102 of electrical board
●
Assemble back the cover of electrical box
(b) Wiring installation for wired remote controller (2 methods);
●
Wired remote controller casing can be opened by pressing the slots with minus screw driver (see below
diagram)
●
Decide the
Þ
xing location of remote controller so that the length of wire shall be within 15 meters.
CAUTION
!
●
Do not cut the provided wire. Excess wire should be properly wound and
Þ
tted at safe
place.
●
Do not join the wire with additional wire.
Top casing
Bottom casing
Summary of Contents for RAR-5G1
Page 12: ... 12 MEMO ...
