Hitachi RAM-71QH5, Service Manual

Page: 62 / 83

– 71 –
●
The electric expansion valve is driven by DC 12V. Power is supplied to 1 or 2 phases of 4-phase winding
to switch magnetic pole of winding in order to control opening degree.
●
Relationship between power switching direction of phase and open/close direction is shown below.
When power is supplied, voltages at pins 4 to 1 of CN15~CN18 are about 0.9V; they are about 12V
when no power is supplied. When power is reset, initialization is performed for 10 or 20 seconds.
During initialization, measure all voltages at pins 4 to 1 of CN15~CN18 using mutimeter. If there is any
pin with voltage that has not changed from around 0.9V or 12V, expansion valve or microcomputer is
defective.
●
Fig. 11-2 shows logic waveform when expansion valve is operating.
11. Electric expansion valve
Table 11-1
MICRO COMPUTER
A
B
B
A
Pin
Drive status
Lear
wire
1
ON
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
OFF
OFF
ON
OFF
ON
OFF
OFF
OFF
ON
ON
OFF
OFF
OFF
ON
OFF
OFF
OFF
ON
ON
OFF
OFF
OFF
ON
2 3 4 5 6 7 8
White
Blue
Operation mode
VALVE CLOSE
VALVE OPEN 1
8 2
7 3
6 4
5 5
4 6
3 7
2 8
1
Yellow
Orange
phase No.
4
3
2
1
Table 11-2