manualshive.com logo in svg

Hitachi RAK-60NHA1, Instruction Manual

Share
Download
Hitachi RAK-60NHA1 Instruction Manual Download Page 4

– 4 –

INDOOR UNIT

NAMES AND FUNCTIONS OF EACH PART

Air 

fi

 lter

To prevent dust from coming into the indoor unit.
(Refer page 21)

Front panel

Indoor unit indicators

Light indicator showing the operating condition.
(Refer page 5)

Horizontal de

fl

 ector 

●

 Vertical de

fl

 ector 

(Air Outlet) 

(Refer page 16)

Remote controller

Send out operation signal to the indoor unit. So as 
to operate the whole unit.
(Refer page 6)

WIDTH (mm)

1030

MODEL

RAK-60NHA1, RAK-70NHA1

HEIGHT (mm)

295

DEPTH (mm)

191

MODEL NAME AND DIMENSIONS

MULTI-AIR CONDITIONER

With this multi-air conditioner, several indoor units can be connected to one outdoor unit to be driven. You can operate 
the required number of indoor units.

Combination of Operations:

●

  You cannot operate the indoor units in the 

following combinations.

●

  The indoor unit which is switched on 

fi

 rst continues to 

operate, but other indoor units which is switched on later 
does not operate while the lamp lights.

●

  To re-start an indoor unit which was operated later, stop 

the indoor unit which was operated 

fi

 rst or later and reset 

the type of operation, then perform operation again.

One unit

Heating

Other unit

Cooling

Dehumidifying

Circulating (fan)

Adjusting the Number of Indoor Units:

Decrease the number of indoor 
units to be operated especially 
when it is very hot or cold or 
when you want to reach the 
present temperature quickly.

Stopped Indoor Units:

When an indoor unit is operated in the cooling,   
heating or dehumidifying mode in the room, the 
sound of refrigerant 

fl

 ow may be heard from 

a stopped indoor unit or a stopped indoor unit 
may become warm. This is because the indoor 
unit returns refrigerant to the outdoor unit to be 
ready for operation.

When operation mode is selected:

●

  When heating operation is automatically selected for the 

fi

 rst indoor unit, the next indoor unit will then start to heat. 

Also, if cooling or dehumidifying is automatically selected for the 

fi

 rst indoor unit, the next indoor unit will also start 

to cool or dehumidify.

During automatic operation:

(EN1) RAK-60-70NHA1   4

(EN1) RAK-60-70NHA1   4

3/27/14   6:24 PM

3/27/14   6:24 PM

Summary of Contents for RAK-60NHA1

























Reviews:

No comments

Brands by name

Popular brands

Load more brands