– 21 –
ENGLISH
2. Washable Front Panel
●
Remove the front panel and wash with clean
water.
Wash it with a soft sponge.
After using neutral detergent, wash thoroughly
with clean water.
●
When front panel is not removed, wipe it with a
soft dry cloth. Wipe the remote controller thor-
oughly with a soft dry cloth.
●
Wipe the water thoroughly.
If water remains at indicators or signal receiver
of indoor unit, it causes trouble.
Method of removing the front panel.
Be sure to hold the front panel with both hands
to detach and attach it.
!
CAUTION
●
Do not splash or direct water to the body of the unit when cleaning
it as this may cause short circuit.
●
Never use hot water (above 40°C), benzine, gasoline, acid, thinner
or a brush, because they will damage the plastic surface and the
coating.
Removing the Front Panel
Arm
●
When the front panel is fully opened with both
hands, push the right arm to the inside to
release it, and while closing the front panel
slightly, put it out forward.
Attaching the Front Panel
●
Move the projections of the left and right
arms into the Flanges in the unit and securely
insert them into the holes.
Projection
ole
Flange
(EN2) RAK-60-70NHA1 21
(EN2) RAK-60-70NHA1 21
3/27/14 6:29 PM
3/27/14 6:29 PM
Summary of Contents for RAK-60NHA1
Page 24: ... 24 MEMO ...
