Hitachi RAD-18NH7A, Instruction Manual

Page: 11 / 161

– 11 –
ENGLISH
TIMER RESERVATION
■
ON Timer and OFF Timer are available.
1
OFF TIME setting
●
Select the OFF TIME by pressing the (OFF)
Button.
● Setting time will change according to the below
sequence when you press the button.
●
The value change quicker if you keep pressing the
button.
OFF Timer Reservation
■
Operation stop at setting time
2
Press the (Reserve) button
● OFF TIMER reserved with a signal received sound
“beep”.
●
The (OFF) Mark starts lighting instead of blinking.
0 . 5 1 . 0 1 . 5 9 . 5 10 11 12
0.5 hour interval 1 hour interval
1
ON TIME setting
●
Select the ON TIMER by pressing the (ON)
Button.
●
At the beginning of setting, time 6 hours was set.
● Setting time will change according to the below
sequence.
● The value change quicker if you keep pressing the
button.
ON Timer Reservation
0 . 5 1 . 0 1 . 5 9 . 5 10 11 12
0.5 hour interval 1 hour interval
1
Press the (Cancel) button
●
As the time settings are stored in remote controller
memory, you only have to press the (Reserve)
button in order to use the same setting next time.
CANCELLATION of Timer Reservation
2
Press the (Reserve) button
● ON TIMER reserved with a signal received sound
“beep”.
●
The (ON) Mark starts lighting instead of blinking.
■
Operation will start for setting
temperature at setting time (The starting
time may different depend on the room
temperature and set temperature).
Hr.
Hr.
Hr.
Hr.
(EN1) RAD-18/25/35/50NH7A 5/7/08, 11:33 11
Black