– 17 –
ENGLISH
2. CLEANING OF FRONT PANEL
●
Remove the front panel and wash with clean water.
Wash it with sponge. After using detergent, wash
throughly with clean water.
●
When front panel is not removed, wipe it with a soft
dry cloth.
●
When it is excessively dirty, wipe with a soft cloth
soaked in lukewarm water or neutral detergent. Then
wipe thoroughly with a soft dry cloth.
●
Wipe the remote controller thoroughly with a soft dry
cloth.
●
Wipe the water thoroughly.
If water remains at the indicators or signal receiver
of indoor unit, it causes trouble.
Method of Removing the Front Panel
●
Be sure to hold the front panel with both hands to
detach and attach it.
CAUTION
●
Never use hot water (above 40°C), benzine, gasoline, acid, thinner
or a brush, because they will damage the plastic surface and the
coating.
Removing the Front Panel
●
When the front panel is fully opened with both
hands, push the right arm to the inside to
release it, and while closing the front panel
slightly, pull it out forward.
Attaching the Front Panel
●
Move the projections of the left and right arms
into the
Flanges
in the unit and securely
insert them into the holes.
!
(EN2) RAS-E10CZ.indd 17
(EN2) RAS-E10CZ.indd 17
5/7/10 9:13 AM
5/7/10 9:13 AM
