
CLEANING THE FRONT PANEL
Front panel can easily get dirty. Use a soft cloth to wipe it.
If the front panel is excessively dirty, wipe the front panel with a soft
cloth either wet with warm water or containing a mild detergent after
which, wipe dry the front panel with a soft dry cloth.
Do not use hot water (50°C or above), volatile liquid, gasoline,acid,
diluting agents or brushes to clean the front panel as they could
damage the plastic finish and paintwork of the front panel.
CAUTION
Please disconnect the power plug before cleaning the
front panel.
1.
2.
3.
Hot water (50°C)
Volatile liquid, acid and others
TROUBLE SHOOTING
BE
FORE CONTACTING SERVICE STAFF TO CHECK AND RECTIFY
The air conditioner unit is not operating.
•
Check whether the power supply plug is properly plugged in.
Abnormal air conditioning effects.
Is the dust filter screen clogged with dust and dirt?
Is the outdoor unit is located in direct sunlight?
Is there any blockage to the air flow of both the indoor and
outdoor units?
Are the doors and windows being left opened or is there any
heat source inside the room?
Is the temperature setting appropriate?
1.
2.
3.
4.
5.
Notes
•
In quiet or stop operation, the following phenomena may occassionally occur,
but they are not abnormal for the operation.
(1)
Slight flowing noise of refrigerant in the refrigerating cycle.
()
Slight rubbing noise from the fan casing which is cooled and then
gradually warmed as operation stops.
•
The odor will possibly be emitted from the room air conditioner because the
various odor, emitted by smoke, foodstuffs, cosmetics and so on, sticks to it.
So
please clean the air filter and the evaporator regularly to reduce the odor.
•
Please contact your sales agent immediately if the air conditioner still fails to operate normally after the above
inspections. Inform your agent of the model of your unit, production number, date of installation. Please also
inform
them
regarding the fault.
•
Power supply shall be connected at the rated voltage, otherwise the unit will be broken or could not reach the
specified capacity.
- 24 -