– 6 –
NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT
REMOTE CONTROLLER
This controls the operation of the indoor unit. Signal range to reach indoor unit is about 7 meters. If
inverter lamp is used, the range of control may be shorter.
This unit can be
fi
xed on a wall using the
fi
xture provided. Before
fi
xing it, make sure the indoor unit
can be controlled from the remote controller.
●
Transmission sign
The transmission sign blinks when a signal is sent.
●
Display
This indicates the room temperature selected, timer status, function
and intensity of circulation selected.
●
AIR SLEEP button
Use this button to set a comfortable air sleep temperature in the
room or start operation.
●
DEHUMIDIFYING button
Use this button to dehumidify the room or start operation.
●
COOLING button
Use this button to set cooling mode in the room or start operation.
●
RESET button
●
POWERFUL MODE button
A
Use this button to deliver faster and more comfortable air-conditioning
or start operation.
TO
●
STOP button
Press this button to stop operation only.
●
ONE-TOUCH SILENT button
Use this button to set silent condition.
●
FAN SPEED selector
This determines the fan speed. Each time you press this button, the
intensity of circulation will change from
(AUTO) to (HI) to
(MED) to (LOW) to (SILENT).
●
AUTO SWING button
Controls the angle of the horizontal air de
fl
ector.
●
TEMPERATURE button
Use this button to raise or lower the temperature setting. (Keep
pressed, and the value will change more quickly.)
●
OFF-TIMER button
Select to turn OFF time.
●
ON-TIMER button
Select to turn ON time.
Precautions for Use
●
Do not put the remote controller in the following places.
●
In direct sunlight.
●
In the vicinity of a heater.
●
Handle the remote controller carefully. Do not drop it on the
fl
oor, and protect it from water.
●
Once the outdoor unit stops, it will not restart for about 3
minutes (unless you turn the power switch off and on or unplug
the power cord and plug it in again).
This is to protect the device and does not indicate a failure.
A9R344241.tmp 4
2/17/16 10:47 AM
