Hitachi RAC-260GA Instruction Manual Download Page 10

Page: 10 / 27

– 10 –

RESET

FAN SPEED (AUTO)

..... When the AUTO fan speed mode is set in the cooling operation:

●

When the difference of room temperature and setting temperature is
large, fan starts to run at HI speed.

●

After room temperature reaches the preset temperature, the cooling
operation, which changes the fan speed and room temperature to obtain
optimum conditions for natural healthful cooling will be performed.

For the cooling operation

FAN OPERATION

You can use the device simply as an air circulator. Use this function to dry the interior of the indoor
unit at the end of summer.

Press the FUNCTION selector so that the display indicates
(FAN).

Press the (FAN SPEED) button.

Press the (START/STOP) button. Fan operation starts
with a beep. Press the button again to stop operation.

START

STOP

CIRCULATION OPERATION

Press the FUNCTION selector so that the display indicates
(CIRCULATE).

Press the FAN SPEED button and select the desired FAN
SPEED (the display indicates your choice).

Press the temperature control button to set to the desired
temperature.

Press the (START/STOP) button. Circulating operation
starts with a beep. Press the button again to stop operation.

■

As the settings are stored in memory in the remote controller,
you only have to press the (START/STOP) button next time.

START

STOP

(EN2) RAS/RAC-260/350GA

18/1/06, 10:13 AM

Summary of Contents for RAC-260GA




























Search results

Summary of Contents for RAC-260GA

Reviews:

Related manuals for RAC-260GA

Brands by name

Popular brands

Hitachi RAC-260GA, Instruction Manual

Search results

Summary of Contents for RAC-260GA

Reviews:

Related manuals for RAC-260GA

Brands by name

Popular brands