background image

– 5 –

ENGL

ISH

NAMES AND FUNCTIONS OF EACH PART

INDOOR UNIT INDICATIONS

TIMER LAMP  (Orange)

This lamp lights when the timer is working.

FILTER LAMP (Green)

When the device is operated for a total of about 200

hours, the FILTER lamp lights indicates that it is time

to  clean  the  filter.The  lamp  goes  out  when  the

(AUTO  SWING)”  button  is  pressed  while  the

operation is stopped.

OPERATION LAMP (Yellow)

This lamp lights during operation.

The  OPERATION  LAMP  flashes  in  the  following

cases during heating.

(1) During preheating

For about 2-3 minutes after starting up.

(2) During defrosting

Defrosting will be performed about once an hour

when frost forms on the heat exchanger of the

outdoor unit, for 5-10 minutes each time.

TEMPORARY SWITCH

Use this switch to start and stop when the remote controller does not work.

This temporary operation will be at the most recent setting made. (The unit

will immediately go into automatic operation once power is switched on.)

  CAUTION

Turn off the circuit breaker or pull out

the  power  plug  if  the  unit  is  not  be

operated for a long period.

If the power stays on and the unit is not operated, power is slightly consumed in the control circuit.

The power is saved by turning off the power switch (or the circuit breaker when the power is supplied

from the outdoor unit).

 

 Frame

Attaching the air purifying filters (Accessories) to the filter frame.

Attach the air cleansing and deodorizing filters to the frame by

gently compress its both sides and release after insertion into

filter frame.

The cooling capacity is slightly weakened and the cooling speed

becomes slower when the air purifying filters

are used.

Air purifying filters can be used for about 1

year. When you want to renew it, please ask your sales agent.

Optional air cleansing and deodorizing filters(SPX-CFH15).

Summary of Contents for RAC-25YHA2





















Reviews: