Hitachi R-W661PRU1, Instruction Manual

Page: 7 / 24

To set the fine adjustment of the temperature
(Refrigerator compartment/ Freezer Compartment)
Touch “ Temp. Control ”
for 5 seconds until 1 “Peep!”
sound is heard.
Each time you touch the button, the corresponding indicator lamp changes in order shown below (9 steps).
To cancel the fine adjustment of the temperature.
Touch “ Temp. Control ” button for 5 seconds until “PiPi!” sound is heard and you can set temperature by normal step (5 steps)
Touch “Select” and “Temp control” to make as adjustment.
Indication
lamp
Setting
Sound
Cold
Pi! Pi! Pi! Pi!
Normal
PiPi!
Pi! Pi!
Pi!
Coldest
Pi!
Other Functions
1
( Lighting Blinking Turned off )
Pi!
Peep!
1,2,..5 Seconds
Touch “Temp. Control”
for 5 seconds until 1 “PiPi!”
sound is heard.
Pi!
PiPi!
1,2,..5 Seconds
This function is subjected to change according model type.
Factory setting, the adjustment temperatrure by normal step (5 steps ).
NOTICE
2
Quick Freezing
Energy Saving
When you want to freeze food or make ice quickly, use this function.
Touch the button again for stop Quick Freezing
operation, until lamp light is off.
Touch the button for start Quick Freezing
operation, lamp light is on.
Pi!
PiPi!
PiPi!
After 2 hours (approx.) Quick Freezing
operation will be finished, lamp light is off.
opening and closing
the doors not to have a emperature rise of the refrigerator compartment.
●
During "Quick Freezing", priority cooling of the freezer compartment will be done,Thus, try to avoid unnecessary
2 hours (approx.)
3
Recommend to use this function in case of low storage volume, or a long vacation when the doors are not opened for long time.
Touch “Energy Saving” button
for Start Energy Saving
operation, light is on.
Pi!
Touch “Energy Saving” button
again for stop Energy Saving
operation, light is off.
PiPi!
● In case the compartment temperature rises up, the operation will be back to a normal setting temporarily.
● After a long time operation of “Energy Saving”, in some cases, fatty ice cream, etc, may become soft. Please stop
● If you press “Quick Feezing” button during "Energy Saving " operation, “Energy Saving” operation will be cancelled.
“Energy Saving” operation in this case.
4
Touch “Lock” the button
for 5 seconds
(“Lock” light is on)
touch “Lock” the button
for 5 seconds again
(“Lock” light is off)
To stop this function,
Lock
You can prevent mischief of all the buttons on the control panel caused by children.
Pi!
Peep!
1,2,..5 Seconds
.....
PiPi!
1,2,..5 Seconds
7
NOTICE
NOTICE