Preparations before Use
5
Swing Partition suggestion
Ins allation
performance may not be obtained, if the room temperature is too low or too high.
3) Do not install the refrigerator where it is exposed to direct sunlight or other heat soure.
4) Install in an atmosphere which is dry or has air ventilation.
5) The refrigerator requires enough air ventilation space around the cabinet to have efficient
cooling performance. Space of at least 30 cm over the top, 10 cm at rear and 5 cm at both sides
6) Ground the refrigerator to prevent electric shock and noise interference. Alway ground this refrigerator.
when using it in place with high humidity or moisture (please consult with retailers).
7) Make the refrigerator stand horizontally by adjusting the leveling legs (adjustor).
Optimal Food storage
1) Keep enough space between food. Several food placed too close together may obstruct the flow of cold air.
2) Make food cool enough before putting it in the refrigerator. Putting warm food in the refrigerator raises the
inside temperature and wastes electricity.
3) Do not block the cold air vent. This will adversely affect the cold air flow and may not keep the temperature
inside even. Moreover, it could result in freezing food near the vent.
4) Using food wrap or sealed containers prevent the food from drying on transition of smells.
1
2
3
When installing,
do not press the
power plug with the
refrigerator back.
CAUTION
t
1) lnstall on a rigid and level floor.
2) Please use this refrigerator in a room temperature between 10°C to 43°C Sufficient
Before use
2) Cleaning inside the refrigerator. Wipe the surface gently with soft cloth.
an outlet soon after it is installed. Surely use with the rated voltage and exclusive power outlet.
4) Allow enough duration for sufficient cooling before storing food. It may take about 4 hours
to fully cool down and could even take about 24 hours when the ambient temperature is high.
3) Connect the refrigerator to an exclusive wall power outlet.The refrigerator can be connected to
1) After transporting : If Refrigerator has been kept horizontal position for more than 10 minutes for
transportation or any other reasons,it should stand upright for more than 1 hour before plugging it in.
Without adjusting the legs, door heigh may not be level, or there may be abnormal
vibration or noises depending on floor conditions.Follow the instructions below.
When opening the doors, please open
carefully untill it stop approximate at 120
Do not over open. Otherwise the door
may cause damage.
120
120
Turn the adjustable legs to lower the adjustable legs until they touch the floor firmly.
Compare the height of left and right doors and lower adjustable leg whose
Turn the adjustable leg for 1 turn makes approx. 1mm door height change.
It will take several days until the legs fits the floor and the door height
door height is lower than the other until the both door height become level.
becomes stable.
●
■
●
Swing Partition suggestion
Do not hold the swing partition while opening or closing the right door.
Whenever the door is opening, the swing partition will be close
In order to prevent from dew, there is a heater installed inside to heat up
There are not abnormal when you feeling heavy while opening or
●
●
●
●
Otherwise, another parts may collapse.
automatically. While the door is closing, the swing partition will be open.
Please follow as usual. Even if, the swing partition may collapse with
swing stopper and the door will not close completely.
the swing partition. Due to this heater, the temperature of the swing
partition is hot( the swing partition is not defective though it is hot.
closing the right door which is installed the swing partition.
for proper air circulation.
Summary of Contents for R-W661PRU1
Page 23: ...23 ...