48
ICE COMPARTMENT
(AUTOMATIC ICE MAKER)
Ice Compartment
Control Panel
“Water Supply” indicator lamp
Ice Making button
Display
Ice Making buttons
Ice Compartment
AUTOMATIC ICE MAKER
Ice Tray
Water Supply
Container
(Approx. 1.0 L)
Ice Case
Ice scoop
Add ice line
Add water line
Take off the Water
Supply Container.
When the “Water” indicator
lamp is lit or the water level
reaches to the “Add water line”,
replenish water.
Ice-Making starts automatically.
●
Ice cubes are stored in the Ice Case.
●
12 pieces of ice cubes are made by one ice-making operation.
●
When ice cubes reach the Container-full line, the
automatic ice-making function is suspended. The function
automatically resumes when ice gets low.
●
When the Ice Case contains no ice cube, you may hear a
large sound when ice cubes fall from the Ice Tray.
Replace the Water
Supply Container.
Push it straight beyond the
“Container set position” line
completely.
Water will not be supplied until
the water supply container is pushed to the end.
※
Water may spill out if the water supply container is inclined.
Wipe off spilled water immediately.
Open the lid and add water.
Water level can not exceed
“Container-full line”.
※
Do not pour water into it beyond
the full water line.
Lid
Container-full line
Container set position
Touch
button to
turn on “On” indicator
lamp.
The “Ice Making” mode is set to “On” (light on) before
shipping.
1
2
5
4
3
It may take longer time to make ice in the
following cases:
・
It is used for the first time (it may take 24 hours or more).
・
It is set to the “Energy Saving” mode.
・
The door is opened/closed frequently.
・
Large volume of foods is stored in the refrigerator at one time.
・
In case of power outage.
・
With the low ambient temperature in winter, etc.
・
After the ice tray is cleaned.
・
When the door of the Freezer Compartment / Ice Compartment is
not closed completely.
・
When the temperature of the Freezer Compartment is set to “
■
”.
Notice
Container-
full line
Add water line
Ice Storage Space
How to make Ice
Perform “Ice Maker Cleaning” when making ice for the first time or for the first time in a week or more.
Pg.58
Push it
Tea
JUICE
MINERAL
WATER
●
Do not use the following ones because they may cause malfunction,
deformation or sticking ice.
Mineral water
(Hardness: 100mg/L or less)
Filtered water or
boiled water
Well water
(Required to satisfy the appropriate
water quality standard)
Request
19
●
WARNING: fill with potable water only.
●
Water for ice making is according to your drinking standard. Quality
of tap water may vary in different countries. Please check and verify
with your local authority.
●
Change water and clean the container at least once a week for
hygiene purposes.
Pg.59
●
If the ice made of mineral water containing a lot of mineral
ingredients is put into water, white powder may come out,
however this is due to those mineral ingredients and harmless.
●
Furthermore, these types of water are easily contaminated with bacteria.
Please wash the container usually once 3 days.
