50
HOW TO REMOVE PARTS
Fixed shelf
Ice Compartment/ Upper Freezer
Lower Freezer
Vegetable Compartment
Height adjustable shelf
・
Lower shelf
Reversible shelf
Vacuum Case with the door
Ice Compartment/Upper Freezer
Door pocket
Vegetable Compartment/Lower Freezer
●
Draw the door fully and lift up the case towards you.
Put the case bottom on the frame and set the case.
●
Draw the door fully and pull
up the Spacious vegetable
case as shown in the fi gure.
●
Lift up the front part of
the door, and draw it
further and incline it.
●
Lift up the Vegetable Case.
●
When installing it, insert the pins on the left/right
inner sides of the Vegetable Case into the square
holes on the frame, and put the edge of the
Vegetable Case on the frame to install it.
When installing it, insert the pins on the left/right of
the Lower freezer case into the square holes on the
frame to install it.
Moreover, hitch the pins on the left/right of the Slide
case to the outside of the Lower freezer case.
When installing the shelf, slide it until
it reaches to the interior wall, then
slightly lift up the back of the shelf and
push it in. (hitch the forks of the shelf
to the parts on the back of the shelf)
●
Slightly lift up and pull out.
●
Draw the shelf, and pull off
the two pins on the lower
right and remove it.
●
Pull the door, lift the case
at the edge of it lightly,
and then pull it out.
For more information.
Pg.42, 43
●
Lift up the door pocket while
tapping the left/right of its
bottom surface, and remove it.
Insert the door pocket fully to the
end when installing it
1
1
Slightly lift up the back
of the shelf and draw it.
Draw the door fully, and draw the Slimline slide case and the Slide case
respectively.
Raise the shelf as shown in fi gure, and
turn it and remove it.
Lift up the Lower
freezer case.
2
2
Door may damage if drawing
the shelf without turning it.
Caution
Pin
1
2
3
■
How to install the slide door
Frame
Frame
Tap
Tap
Frame
