background image

NOTICE

Ice Making Time

 When the door is frequently opened and closed

 When a large amount of food is placed inside the 

    refrigerator at the same time

 After "Ice Tray Cleaning" has been run

 When there is a power outage

 During winter, or when the surrounding temperature is low

Ice cannot be made until the interior of the refrigerator is sufficiently cool. It may take 24 hours or longer to make ice 

for the first time after installation. Normally, however, it only takes 2 to 3 hours to make 8(eight) ice cubes. 

The Ice Preparation Time shown is the average time to make ice when the ambient temperature is 32°C 

and the door is not opened and closed. 

When you wish to make ice especially quickly, use the "Quick Freezing" function.

Normal Operation

Quick Freezing

Approx. 90 to 

1

10 minutes

Approx.  70 to 90 minutes

Approx. 160 cubes

(maximum)

Ice Storage Capacity

The Ice Making Time will be longer in the following situations.

Ice Preparation Time ( 8 (eight) cubes / ice making cycle)

19

NOTICE

Water Dispenser

How to use the Water Dispenser

Discard the first cup of water that is dispensed just after installation, as the system needs to rinse itself out.

 It may take 24 hours or longer for the water in the Water Tank to cool sufficiently when the ambient temperature is high, such as during 

    summer. Normally, the water (5 L in volume) can be chilled in 8 to 9 hours.

 When you wish to have cold water quickly, use the Ice Dispenser to put ice in your cup, then dispense water using the Water Dispenser.

 The Water Dispenser will turn off temporarily if used continuously for more than approx. 60 seconds. In this case, the Dispenser Illumination will 

   lash, indicating that the Water Dispenser has been stopped. Remove your glass from the Dipenser Lever in order to let the system reset. 

   After the reset, the Water Dispenser can be used again.

 Hold the cup up when 

pressing it against the

"Dispenser Lever". 

2. To dispense water, simply press a 

    cup against the "Dispenser Lever". 

1. Touch the "Water" button.

Pi!

 If the lamp is on, fill water.

If "Tank Empty” lamp 

    is turned on.

Lamp lights on.

How to use the Automatic Ice Maker

T

urning on/off the

Automatic Ice Maker Function

NOTICE

 If you do not intend to use the Automatic Ice Maker, manually cancel its operation. 

First, check whether the Automatic Ice Maker is in operation.

3. When restarting operation.

1. When in operation.

2. To stop the operation, Touch 

    the "Ice Maker" button. 

Pipi!

Pi!

Lamp lights on.

Lamp lights o

f

f.

Lamp lights on.

How to use lce and Water Dispenser

Summary of Contents for R-MX700GVRU0


































Reviews: