9
3
Other Functions
10
When you want to cool food or drinks quickly, use this function.
1. Put food on the quick cooling corner.
"Quick Cooling"is more effective if food is placed
near the back wall of the refrigerator compartment.
2. Touch "Quick Cooling" button
to start Operation.
Lamp lights on.
3. To stop this function before it is
completed, touch "Quick Cooling" again.
Lamp lights off.
"Quick Cooling" will be finished
automatically in approximately 90 minutes.
● During defrost period,"Quick Cooling "operation will stop even when the lamp lights on.
After finishing its period, the operation will restart automatically.
● Please note "Quick Cooling " mode will be released after power cut off or unplug.
● Normaly, Lamp is off when no operation approximately 10sec. after the end of operation.
indicator LED become unlit.
“Quick Cooling”
NOTICE
"Quick Cooling" corner is located on
the upper part of the refrigerator compartment.
Pi!
Pipi!
Pipi!
4
You can prevent mischief of all the buttons on the control panel by children.
1. Touch "Child Lock" button for 5 seconds(to lock).
Lamp lights on.
2. To stop this function , Touch 5 seconds "Child Lock" again.
● When "Child Lock" is activated, other buttons will not be accepted even if you touch, but Auto Door of the touch
operation is possible.
NOTICE
Lamp lights off.
“Child Lock”
Peep!
Pipi!
5
● If "Energy Saving" operation is working in high
humidity environment, dew may appear on refrigerator
surface.
CAUTION
“Energy Saving”
● In case the compartment temperature rises u
p, the operation will be back to
● After a long time operation of “Energy Saving
”, in some cases, fatty ice cream, etc,
● If you Touch “Quick Feezing” or “Quick Cooli
ng”
button d
uring "Energy Saving " operation, “Energy Saving” operation will
be done after “Quick Freezing” or “Quick Coo
ling” operation finished.
NOTICE
“Energy Saving” operation in this case.
Energy Saving
2
1
operation, lamp light is on.
Touch “Energy Saving” button
for Start Energy Saving
operation, lamp light is off.
Touch “Energy Saving” button
again for stop Energy Saving
Recommend to use this function in case of low storage volume, or a long vacation
PiPi!
Pi!
● No ECO Monitoring sensor detecti
on.
● No door open.
● No control panel operation.
■
may become soft. Please stop
a normal setting temporarily.
when the doors are not opened for long time.
Lamp lights off.
