Hitachi R-B6200H Manual Download Page 58

Page: 58 / 60

When this indicator lamp

(Lock on the panel for operation) is illuminated, any other button will not be actuated by touching it.

This can prevent erroneous operation of the Control Panel or misuse by children.

■

When you want to stop the alarm

Touch and hold the

button for three seconds
with all the doors closed until
one beep sounds.

When the setting has been
completed, the indicator
lamp is restored to the
original state.

■

Locking

Touch and hold
the

button for

approximately three
seconds until one
beep sounds.

is lit to indicate

that the lock has been
completed.

■

Unlocking

Touch and hold
the

button for

approximately three
seconds until two
beeps sound.

is lit to indicate

that the lock has been
released.

[ eco OPERATION INDICATOR LAMP]/DOOR ALARM/LOCKING THE CONTROL PANEL

[“eco” Operation indicator lamp]

When the refrigerator is operated in a manner to reduce power consumption, such as Frost Recycle Cooling,
the indicator lamp is automatically lit to indicate that the refrigerator is operating in the energy saving mode.

When a door remains open for 30 seconds or more, alarm sounds as shown below and characters on the Control Panel are blinking to indicate that the door is open with sound and light.

The Door Alarm can be stopped.

■

When you want to sound the alarm again

Touch and hold the

button for three seconds
with all the doors closed until
two beeps sound.

When the setting has been
completed, the indicator
lamp is restored to the
original state.

[

eco Operation indicator lamp]

[“eco” operation indicator lamp] can be turned off when you feel uneasy at night, etc.

■

How to turn off the
indicator lamp

Touch and hold the

button for three seconds with
all the doors closed until the
[“eco” Operation indicator
lamp] blinks.

The [“eco” Operation
indicator lamp] is unlit.

■

How to restore the setting

Touch and hold the

button

for three seconds with all the doors
closed until the [“eco” Operation
indicator lamp] becomes lit.

The [“eco” Operation indicator lamp]
is lit for three seconds.
After that, the lamp is lit or unlit,
depending on the operation conditions.

The indicator

lamp blinks

Indicator

lamp is ON

Touch this button and hold it for 3 seconds

●

If [“eco” Operation indicator lamp] isn’t illuminated, check the following things.

・

Is the [“eco” Operation indicator lamp] set as Off?

→

Perform the above-mentioned procedure for how to return.

・

Immediately after installation, when a lot of food is stored at a time, or when you open or close a door frequently, the

compressor operates at a high speed and this indicator lamp is not lit.

→

Open/close the door quickly or minimize

the number of opening/closing the door.

・

When the refrigerator is operated with FREEZER , REFRIGERATOR or QUICK enabled,

→

It will be illuminated after

the quick cooling functions fi nish and the operation of the refrigerator gets stable.

●

When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting

where the [“eco” Operation indicator lamp] is illuminated.

●

When the Door Alarm is disabled, characters on the Control Panel no longer blink and operation sound is no longer made, but alarm

indicating cleaning of the ice-making tray does sound.

●

The Door Alarm is enabled when shipped.

●

When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting where the

Door Alarm sounds.

※

From 30 seconds onwards, the Door Alarm sounds
only when the energy saving mode is set.

The Refrigerator Compartment, Ice Compartment,
Lower Freezer and Vegetable Compartment have the
Door Alarm function (but the Upper Freezer doesn t).

Notice

●

Electric pulling-out operation will not be stopped even if the Lock function on the panel for operation is set as On.
To disable the AUTO DOOR function, unlock the Control Panel and then press and hold the

button for three

seconds or more until two beeps sound.

Pg.48

Notice

Door Alarm

Locking the Control Panel

Duration when door is open

1 minute

30 seconds

※

2 minutes

Alarm sound