![background image](http://html.mh-extra.com/html/hitachi/pv-xa100/pv-xa100_instruction-manual_146019019.webp)
E-19
Remove the brush holder.
1
Detach the rotary brush and remove dust.
2
Attach the rotary brush.
3
Attach the brush holder.
4
Flip over the power head and open the lever.
Brush holder
Lever
Remove dust.
Tweezers
Wash the rotary
brush with water.
Groove
Groove
Hook
Scissors
Rotary
brush
Remove the dust
tangled in the groove
using tweezers, etc.
Cut and remove
dust tangled in the
rotary brush using
scissors, etc.
Remove the brush holder.
Adjust the rotary brush with the groove.
Attach to its original position.
Insert the hook.
Attach the brush holder.
Close the lever.
l
Do not use cleansers, bleach, etc. Doing so may cause discoloration, deformation, etc.
l
After washing the rotary brush with water, thoroughly air dry it before attaching it.
Note
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
おおお
Brush maintenance.
When attaching the brush holder, fasten the hook first. Failure to do so may cause damage.
Note
Maintenance
Summary of Contents for PV-XA100
Page 24: ...3 N9612 7 M3 CH ...