7
/
14
INITIALIZATION OF CENTRAL STATION
2. Initialization
When the central station is changed to the initializing mode, the LCD indication on the central
station is as shown below. In this condition, depress the “RESET” switch, and the flickering “06”
indication is changed to ON and the initialization is performed.
(In case that initialization is not required, depress the “CHECK” switch, the LCD indication is
automatically changed as shown below.)
Group Setting Table of Central Station
Indoor Unit Address
RSW of
Indoor
Unit
0 1 2 3 4 5 6 7 8 9 A B C D E F
Indication
of PSC-5S
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Fill the group number (1-16) in the above table.
Circle the unit number of the master unit.
Depress
“RESET” or
”CHECK”
switch.
“06” flickers. Depress “RESET” switch
and “06” is changed to ON.
In case of EEPROM initialization, it
takes approximately 30 – 60 seconds.
To Connection Check
Refrigera
nt Numbe
r
Summary of Contents for PSC-5S
Page 2: ......
Page 4: ...120 mm 120 mm ...
