Hitachi Plura VF-PBM-207, Operating Instructions Manual

Page: 10 / 32

Page 10 of 32
Interface description
Interface Description
VF port DC 12V Input
Y, Pb, Pr Analog Component Video Input
Tally R/G on/off
Y out Camera video – Analog Component Loop
Out. *Drives 75Ω load+
Pb out
Pr out
RS-232C
Factory use - Update/Multi Control/Auto
color calibration
Talent Tally Switch Turns the Talent (rear) red TALLY lamp
On/Off.
Menu Overview
In this menu system, there are several ways to customize the menu settings provided.
Most menus consist of three levels to set up the options, but some require greater depth for the variety
of settings. If you press the MENU button, only the first and second level of the menu system will appear
on the monitor screen. The third level can be displayed by pressing ENTER. If a menu has more than
three levels, the pop-up dialogue box will be displayed as the fourth or fifth level.
To display and hide the Menu
Press the MENU button to display the menu. A second press of the MENU button will take you back to
monitor viewing.
To go to the next level
Press ENTER button.
To go back to the previous level
Press MENU button